For unique tab:
IMPORTANT: Please refer to full Operating Manual and read carefully before use.
1. Twist to unlock unit and remove.
2. Add Euky Bear Inhalant (not included).
3. Add water to maximum fill line.
4. Re-insert heating unit, lock into place.
5. Plug into power point, place on a floor mat at least 1.2 m away from any person.
Steam therapy will start within a few minutes and stop when water level drops below the required amount. Switch off when steaming is completed.
USE WITH
Euky Bear Sniffly Nose Inhalant* with Eucalyptus essential oil, for added soothing comfort.
Euky Bear Sleepy Time Inhalant* with Lavender essential oil, to help your little one prepare for sleep.
*Not included, sold separately.
If symptoms persist, talk to your healthcare professional. This product is not to be used for serious respiratory conditions unless recommended by a health professional.
Always read the label and follow the directions for use.
Download Euky Bear Warm Steam Vaporiser Operating Manual here.
Keep out of reach of children.
Keep clear of Vaporiser during operation as steam vent is hot and steam can scald.
Ensure Vaporiser is unplugged during set up.
Turn unit off after steaming is complete.
Never leave Vaporiser unattended where any child could access. Children should be supervised to ensure they do not play with the unit. If there is any potential for any child to access, place Vaporiser behind a physical barrier to reduce the risk of serious burns.
Full Operating Manual and Warranty enclosed. Read Operating Manual carefully before use and retain for reference.
Q. Particles in water after use
Common cause: These can be mineral deposits from your tap water. They can look like dirt, sand or flakes and are harmless. The level of particles present depends on where you live, as hard water areas may contain more. It is an indication that the unit requires cleaning.
Solution: Particles can be flushed away when emptying container. Continue Maintenance Cleaning as needed. For ongoing use, consider using distilled water instead of tap water to eliminate the issue.
Q. Can I re-use the water that’s left, or do I need to empty and refill after each use?
Rinse and refill with fresh water each time you use your Vaporiser. Always empty and rinse your Vaporiser container and the base of the heating module in between each use to help wash away built-up mineral residue and excess inhalant.
Q. I’m worried about mould?
The units will not develop mould during normal use. Steam output from the unit is germ-free and sanitised. However, do not let your Vaporiser sit in old water as it may erode and degrade the parts. To reduce excess condensation in the room, always leave the door slightly open during use and air out the room in the morning.
Q. The Vaporiser is emitting an unusual smell
Common causes:
Solution: Clean Vaporiser as per instructions. Failure to maintain cleaning procedure may damage the unit and void warranty.
Q. Can I add pure (100%) essential oils or oil blends to my Vaporiser?
No. Use only water soluble inhalants designed for vaporisers, like Euky Bear Sniffly Nose or Sleepy Time Inhalant.
Q. Can I use Euky Bearub, or Vicks ointment in my Vaporiser?
No. Chest rubs do not dissolve in water and will damage your Vaporiser. Use of pure oils, chest rubs, solutions or ointments in your Vaporiser can cause malfunction and will void your warranty.
Q. Can I only use Euky Bear Inhalant in my Vaporiser?
We recommend Euky Bear Sniffly Nose or Sleepy Time Inhalants. Only use a water-soluble inhalant designed for vaporisers.
Q. Vaporiser producing insufficient steam
Common cause: The amount and intensity of steam produced will vary. In the morning the water level should have dropped. If this is happening, your Vaporiser is steaming correctly.
Factors that can affect steam production include humidity, temperature and air currents or a a build up of mineral deposits which can be due to water quality (see FAQ ’Particles in water after use’).
Q. I can’t smell the inhalant. How can I tell it’s working?
It’s normal not to smell inhalant after a while as our senses become dulled to consistent aromas. If you are using the correct amount of inhalant then you can be confident it is working correctly.
If you have any further concerns, please email customer service at: contactus@eukybear.com.sg
Q. Why do you recommend placing the Vaporiser on the floor, not on a bedside table?
The unit needs to be positioned on the floor to avoid any risk of it falling or being accidently pulled down, especially by a child. We recommend on a carpeted floor, rug or towel, 1.2 meters away from any person. The unit doesn’t need to be near the intended recipient as the room will humidify uniformly.
Q. My Vaporiser feels warm.
This is normal. Like a kettle, vaporisers can get warm. Carefully read the Safety Information before use. Care needs to be taken not to touch the unit during operation. The Vaporiser produces hot steam which can scald. Never touch the steam outlet while the unit is in use. As per the Operating Manual, always keep out of reach of children. If you have any concerns please email customer service at: contactus@eukybear.com.sg
Q. How do I clean my Vaporiser?Cleaning your Vaporiser is very important. Before cleaning, always switch off and unplug at power point, wait for unit to cool and empty any unused water.
After each use: Rinse all parts clean. Do not submerge heating unit or power cords in water. Dry with a clean cloth.
Maintenance cleaning (approximately per 10 uses): Rinse as per directions above. Sit the base of the heating unit in a pot or jug of white vinegar (up to the rim but not covering the power cord – do not submerge unit) for 20 minutes. Clean the opening of the steam vent gently with a cotton bud dipped in white vinegar. Afterwards, wash base in warm soapy water, rinse thoroughly and dry with a clean cloth. Hard water areas may need more frequent cleaning..
Note: This method no longer requires the use of cleaning tablets and they have been discontinued from our range. Instead we recommend a clean using white vinegar. Vinegar is a common household item that is easily accessible, natural derived and can be used when required. If you still have remaining Cleaning Tablets and would like to continue using them you can do so. Euky Bear Cleaning tablets are non toxic, still suitable to use and you do not need to discontinue immediately. Switch to the white vinegar cleaning method when desired.
Q. Is the packaging recyclable?The Euky Bear Warm Steam Vaporiser packaging has been assessed via the ARL (Australasian Recycling Label), and the unit carton is recyclable.
Euky Bear Sniffly Nose Inhalant with Eucalyptus essential oil, for added soothing comfort.
Euky Bear Sleepy Time Inhalant with Lavender essential oil, to help your little one prepare for sleep.
Euky Bearub 50g - A gentle, soothing Australian Eucalyptus chest rub that helps to relieve a stuffy nose associated with colds and general aches and pains. Used before sleep, it helps make breathing easier. Although adult strength, it is gentle on sensitive skin.
Uses/Indicators: Helps relieve the symptoms of colds. Helps clear nasal passages. Makes it easier to breathe. For the relief of muscular aches and pains. Relieves irritation of minor insect bites.
Head colds: Gently massage Euky Bearub onto chest and back. Repeat two or three times a day and before retiring for a more restful sleep.
For adults, add 8g (two teaspoonsful) of Euky Bearub to a stable bowl of steaming hot water and inhale vapour covering head with towel. Alternatively inhale using 2g in a Vapour Inhaler. Repeat as required. For added relief, massage Euky Bearub onto chest and back.
Muscular aches and pains: Massage Euky Bearub into affected muscles. Repeat as necessary.
Irritation of minor insect bites: Gently apply Euky Bearub. Do not rub in. Repeat as necessary.
If symptoms persist, consult your doctor. Not for infants under 12 months unless directed by a doctor or pharmacist.
Eucalyptus Oil 6.0% w/w
Eucalyptol 6.0% w/w
Menthol 5.0% w/w
Camphor 4.9% w/w
Rosemary Oil 1.0% w/w
For external use only. Use only as directed. Do not use on face, near eyes or in nostrils. For sensitive skin, test a small area before larger application. Discontinue use if irritation occurs. Do not use if foil seal at the mouth of the tube is broken.
Keep out of reach of children. Store below 30°C.
Download Euky Bearub SDS
What age can this be used from?
It’s suitable from 12 months onwards.
How else can you use it?
Some people prefer to apply the rub on the outside of a singlet, or on a tissue tucked into the cot, out of reach.
What is the base made from?
Euky Bearub’s tried and tested formula uses a gentle, pharmaceutical-grade paraffin wax base.
Can it be used for adults?
Yes, it’s suitable for the whole family.
Can I use it in my steam vaporizer?
No, this formula is not suitable for use in vaporisers.
Simply spray around baby’s nursery, children’s bedrooms or adult bedrooms before sleep – it’s also great for day naps, or even while travelling.
Spray around the room for approx. 3-5 seconds. Allow the product to settle before placing child to sleep in the room.
Note: Can be used in conjunction with Euky Bearub and/or the Euky Bear Steam Vaporiser and Inhalant for all-night relief.
Household Uses
Kill germs & bacteria Spray onto surfaces including door handles, change tables, rubbish, nappy bins and toys to kill germs and bacteria.
Hold can 15-20cm from surface and spray until covered in mist.
Test an inconspicuous area first before use.
Deodorise
Use as a natural room deodoriser to remove odours. With no harsh chemicals, it’s a perfect alternative to artificial fragrances.
Freshen mattresses
Freshen mattresses when changing the sheets on cots, children’s or adult’s beds.
Eucalyptus Oil
Menthol Rosemary Oil
Oil of Wintergreen
Spray a fine mist into the air, on bed linen or sleeping bag before nap or bedtime.
Allow product to settle before placing your little one to sleep.
Suitable for 3 months +
Keep out of reach of children. Not to be ingested. Do not spray directly onto skin. Use only as directed. Avoid naked flames. If sensitivity occurs, discontinue use. Store in a cool, dark place.
Download Euky Bear Sleepy Time Linen & Room Mist SDS
Shake well before use.
For use with Steam Vaporiser:
Pour 10mL (2.5 capfuls) of Inhalant into empty vaporiser. Add water to maximum fill line. Refer to your vaporiser manual for further use and care.
For use with Steam Inhaler or Basin:
Pour in hot water. Add 1mL of Inhalant per 250mL of water used, or 4mL (1 capful) per litre. Breathe in vapours.
Not for use in an oil burner.
Do not take by mouth. Keep out of reach of children. For steam inhalation use only. Contains ethanol. Contains bitterant to avoid accidental ingestion. Use only as directed.
Store below 30°C.
Download Euky Bear Sleepy Time Inhalant SDS.
Can I use it in the bath?
No, this formula is not suitable for bath use.
Can I use it in my diffuser?
No, this formula is designed only for vaporizers and is not suitable for use in aromatherapy diffusers.
Can I add other oils in as well when using in my vaporiser?
No, it is recommended to only use water soluble Inhalants in your vaporiser, not pure oils.
My baby still won’t sleep…
Establishing good sleep patterns can take time, and a consistent bedtime routine is key. Euky Bear’s Sleepy Time range is one tool you can use to support a peaceful sleep environment for your little one. For more advice on baby sleep see your GP or maternal child health nurse.
Pour 10mL (2.5 capfuls) of Inhalant into empty vaporiser. Add water to maximum fill level. Refer to your vaporiser manual for further use and care.
Do not take by mouth. Keep out of reach of children. For steam inhalation use only. Contains bitterant to avoid accidental ingestion. Use only as directed. Store below 30°C.
Download Euky Bear Sniffly Nose Inhalant SDS
No, this formula is designed only for vaporisers and is not suitable for use in aromatherapy diffusers.
Can I add a bit more if I can’t smell it anymore?
We recommend the dosage as per label instructions. If after a while it appears less strong, your senses may have become used to the aroma.